LEEZEN MON.01

5" Active Near-Field Studio Reference Monitor

 
 
· Near-field bi-amplified monitor speaker 
· 5” Kevlar LF driver; 1.5” ribbon HF driver
· Amplifier power: LF 40W, HF 30W (RMS)
· Equipped with XLR balanced and TRS balanced/unbalanced inputs
· Acoustically efficient vinyl-laminated MDF cabinet
In stock
Special Price €75 Regular Price €119
A trustworthy reference you can rely on at a price you can afford. This is what the Leezen MON.01 studio monitors were designed to give you. 
 
You know that mixing your music it’s all about making decisions and to make the right decisions you need a reliable sonic reference. In the studio you only want to hear the true sound of your tracks without any frequency coloration and the Leezen MON.01 provide a flat frequency response that will always deliver a faithful rendition of your sound.
 
The Leezen MON.01 are active, bi-amplified studio monitors especially designed for desktop / near-field use. Equipped with a 5” Kevlar woofer and 1.5” ribbon tweeter, the Leezen MON.01 deliver 40W (RMS) of power on the low end and 30W (RMS) on the high end of the frequency spectrum.
An acoustic space selector located on the back of the speakers allows you to adjust their behavior according to the physical conditions of your studio.
 
The Leezen MON.01 monitors allow the direct connection of your sound sources using XLR and 1/4-inch TRS line input connectors that you can use in balanced or unbalanced mode.
 
Whether you are a pro engineer, a home studio owner or simply need a reliable, affordable pair of monitor speakers try the Leezen MON.01!
 
 
SPECIFICATIONS
 
* Type: 2-way near-field studio reference monitors
* LF Driver: 5” (127 mm) Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded
* HF Driver: Cone Ø 145 mm (5.5") / Moving coil Ø 32 mm (1.5")
* Frequency Response: 48 Hz – 45 kHz
* Crossover Frequency: 2.8 kHz
* LF Amplifier Power: 40 W
* HF Amplifier Power: 30 W
* Signal-to-Noise Ratio: 100 dB typical A-weighted
* Input Connectors: 1 x XLR balanced input connector; 1 x TRS balanced/unbalanced input connector
* Polarity: Positive signal at + input produce outward LF cone displacement
* Input Impedance: 20 KΩ balanced, 10 KΩ unbalanced
* Input Sensitivity: 85 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum
* Protection: RF interference, output current limiting, over temperature, turn- on/off transient, subsonic filter, external mains fuse.
* Indicator: Power on/off indicator on rear panel
* Power Requirements: Factory-programmed for 115 V ~50/60 Hz, 230 V ~50/60 Hz, or 100 V ~50/60 Hz
* Cabinet: Vinyl-laminated high-acoustic-efficiency MDF
* Dimensions (H x W x D): 13.3" x 6.9" x 7.9" / 338 mm x 175 mm x 200 mm
* Weight: 13.2 lbs. / 5.0 kg (without packaging)